MODEX 2018 - supply chain, manufacturing, distribution trade show
Georgia World Congress Center
  Atlanta, GA | April 9-12, 2018
  • MODEX the leading trade show for supply chain, manufacturing and distribution industries

Wildeck Introduces Four New Rideable Material Lifts

Wildeck, Inc.

Demand for increased weight capacity and the need for larger payloads results in four new lift models that increase material handling efficiency.

Waukesha, WI – April 2018, Wildeck, Inc. – In response to customer demand for increased weight capacity and the need to move larger loads, Wildeck, Inc. has introduced (4) new rideable material lifts (RML). The new “RML” product category is a major advancement over a traditional “VRC” (Vertical Reciprocating Conveyor) since it allows authorized personnel to safely travel with materials instead of climbing stairs to catch up with the load. Wildeck is announcing its expanded “RiderLift™ Family” of hydraulically-operated rideable material lifts at Wildeck’s Booth # B4747a at the Modex 2018 Show, April 9-12, at the GWCC (Georgia World Congress Center) in Atlanta, GA.
 
Wildeck’s Newly Expanded Family of Rideable Material Lifts, includes:
 
RiderLift™ (base unit)
  • 2,500 lbs. Lifting Capacity (Class C3 for Heavy Load Concentrations)
  • 6 ft. x 6 ft. Car Size
  • 14 ft. travel (Ground plus One Level)
  • 18 fpm (feet per minute) with 3 HP Hydraulic Pump Motor
RiderLift™ XL
  • 5,000 lbs. Lifting Capacity (Class C3 for Heavy Load Concentrations)
  • 8 ft. x 10 ft. Car Size
  • 14 ft. travel (Ground plus One Level)
  • 17 fpm (feet per minute) with 10 HP Hydraulic Pump Motor
RiderLift™ 2XL
  • 8,000 lbs. Lifting Capacity (Class C3 for Heavy Load Concentrations)
  • 10 ft. x 14 ft. Car Size
  • 14 ft. travel (Ground plus One Level)
  • 17 fpm (feet per minute) with 15 HP Hydraulic Pump Motor
RiderLift™ 4XL
  • 10,000 lbs. Lifting Capacity (Class C3 for Heavy Load Concentrations)
  • 12 ft. x 20 ft. Car Size
  • 14 ft. travel (Ground plus One Level)
  • 17 fpm (feet per minute) with 15 HP Hydraulic Pump Motor
“Our expanded family of Type B Rideable Material Lifts (RML) allows customers to choose the exact lift configuration that meets their requirements,” stated Hubert Schlegel – Director of Marketing for Wildeck. “RiderLift™ RML units are ideally suited for a wide range of industrial and commercial applications and, unlike a VRC (vertical reciprocating conveyor), RiderLifts™ have been designed to allow an operator to travel with material between levels. All RiderLift™ models comply with the ASME A17.1/CSA B44 code for Elevators and Escalators and must be installed and serviced by a licensed Elevator Contractor.”
 
RiderLift™ Benefits:
  • Increased material handling efficiency
  • Saves time by allowing workers to travel between levels with their material
  • Improves safety and reduces operator fatigue
  • Increases the utilization of facility capacity gained from mezzanines, rack systems, and pick modules
  • Can be purchased and installed at a fraction of the cost of a freight elevator
“With four new RiderLift™ configurations, Wildeck has placed the power of choice in the customers hands. Whether they need to move pallets of finished goods, fixtures, furniture, heavy carts, machinery, or any large or bulky material; there’s a RiderLift™ that will get the job done.”
 
RiderLift™ material lifts meet all applicable code and safety requirements and are available in either “C” or “Z” loading patterns. They feature a keyed “enable” switch inside the car to ensure use only by authorized personnel. Although they are not a public elevator, a licensed Elevator Contractor must install and service the lift and provide the end user with ongoing State-approved safety inspections and lift Certification, as required by the A17.1 code.
 
Wildeck’s service, parts, and technical support Help-Line is available 24-7 at 800-325-6939 to keep the RiderLift™ RML and any other Wildeck® vertical lift operating at peak efficiency. According to Todd Canham, Product Manager, Lift Products, “Our expanded family of RiderLift™ rideable material lifts are part of Wildeck’s continuing commitment to helping our customers’ projects run smoothly while making their operations safer, more efficient, and more profitable.”
 
Wildeck, Inc. – based in Waukesha, WI – is a member of MHI (Material Handling Industry Association), MHEDA (Material Handling Equipment Distributors Association), the NAEC (National Association of Elevator Contractors), and FMA (Fabricators & Manufacturers Association, International). The company is the largest manufacturer of manual and automated vertical lifts (VRCs), rideable material lifts (RMLs), structural steel mezzanine platforms, and safety guarding products in North America. 
 
A complete line of industrial rolling ladders, custom-designed work platforms, crossovers, and other high access products are also available. Wildeck products improve supply chain productivity and provide additional capacity, efficiency and safety in manufacturing plants, warehouses, distribution centers, and many other facilities. They are sold through a dedicated and experienced network of customer-service-oriented dealers and systems integrators nationwide. 
 
Wildeck, Inc. is a subsidiary of Holden Industries, a 100% Employee-Owned Company. Please contact Hue Schlegel, Director of Marketing at 262-549-4000, ext. 2049, hschlegel@wildeck.com for more information on the complete line of Wildeck® products and services; or visit www.wildeck.com, or e-mail info@wildeck.com.
 
 

For more information please contact:

Hue Schlegel - Director of Marketing
Wildeck Inc.
hschlegel@wildeck.com
800-325-6939 (w), 262-549-3466 (f)

« Back to Press Releases